Every so often your home needs necessary repairs to keep it functioning properly as well as making sure that it is well maintained. More so than cleaning out your gutters seasonally, it may be necessary to repair and replace old gutters so that they do not sag or fail to do their job. If you have the funds to do so, hiring services such as gutter cleaning in Vancouver can make a big difference in the longevity of your gutters. However, if this is not in the budget or you need to replace your gutters all together, this article will provide some helpful tips.
Plan your gutters
Replacing gutters is not a huge ordeal and can be done quite simply. The first step is to measure gutters and downspouts and account for the number of current hangers and downspouts that you have. With these measurements and knowing the quantity of the hangers and downspouts that are needed, you can then go to the hardware store and purchase the necessary supplies to start your project.
Make mounting on the new gutters easy
Before you start replacing the gutters, you may want to ask a friend or family member to assist you with the project as it can be challenging for one person to manage it alone. After you have enlisted help, you will want to make sure that you have a level available so that you can ensure that the downspouts are even and are angled appropriately. Be sure to note the length of the gutter and ensure that it slopes appropriately based on this measurement. Use the old gutters and downspouts as a guide to make the project easier.
Remove old downspouts
Clean the downspouts, remove the screws and remove the old materials. Make sure that the area is cleaned up and you will then be ready to remove the gutter.
Remove the old gutter
You will want to place your ladder just under the gutter so that you have the best angle to remove the screws. Once you remove the screws, you can use a pry bar or a hammer to release the gutter and take it down.
Cut new gutter fitters and hang them up
Once the old gutters are removed, you can then outfit the area for new gutters by measuring and cutting the new fitters properly. When cutting the new fitters, be sure to allow for some overlap so that you can adjoin the pieces together. Be sure to cap off the ends and and seal the inside seams. Another helpful tip is to keep the factory cut ends of the fitters on the outside. After that, attach the downspout and make sure it is angled appropriately. After that, you are all done!
While hiring a company to perform a simple task may not be in your budget, it can be done with patience, attention to detail, and help from a family member or friend. Regularly cleaning them and keeping the gutters free of debri can lengthen the life of your gutter system.